Basic Info.
Display Function
Image & Text Display
Average Power Consumption
All
Display Type
Segment LED Display
Certification
CE, RoHS, FCC
Single Colour
1536X32;768X64
Double Colour
768X32;384X64
Specification
CE+ROSH+FCC
Product Description
Model State | TF-M6NUR/TF-M5NUR Batch supply |
Function introduction | Multi-area displays,network communication,colorful borders,U disk program update,U disk panel set-up,LED display asynchronous control card. |
Usage | indoor/outdoor |
USB function: | USB program update, USB brightness adjustment, USB panel setup. Settings stored as a file format and do not affect the original document in USB. SD card/mini-SD card is Compatible when using USB. |
Pixel | Single colour1536x32;768x64 Double colour768x32;384x64 |
Ports | two 08 port; four 12 ports |
Scanning mode | support 1/16,1/8,1/4,1/2,Scan the monochrome,double color module. |
Storage | 2M |
Program number | Storage for maximum program number:20.Supported windows,with no more than 10 items for each. |
Display | rain,fountain,scroll and much more |
Border | support many Color border,Picture border |
Flash format | support GIF,SWF |
Image format | support BMP,JPG,GIF,WMF,ICO |
Brightness | Level 16 highlighted,support manual |
Screen switch | manual |
Test button | On-board test button,Can switch over the |
Extension function: | Temperature sensor,Temperature&humidity sensor,Brightness sensor(Diagram for connection),RF,Monochrome expand height,Through to 75 full-color interface. |
Electrical parameters | +5V DC(4.5V~6V),Power consumption<0.5W |
Working temperature | -30ºC~70ºC |
Size | 105mm*55mm |
Modbus controller manual
1. IP Address Configuration
<1>Recommend using router,that will automatic search.
Also controller could connect with lan-port directly, sometimes,it need to modify the computer IP ,so that it will search successful.
<2>Controller through the network,will automatic get its own IP within about 5 seconds, afterwhile, software could find the controller directly.
If controller through the network,will automatic get its own IP after about 10 seconds,( remark: in general,when connect with computer directly, controller will not get its own IP) controller will automatic set its own IP as"192.168.1.252". If computer"s IP is "192.168.1.X", and "X" is not "252", software could find the controller by automatic search. If computer"s IP is not "192.168.1.X", please set its IP as""192.168.1.X",and "X" is not "252", then, automatic search again.
2. Senior setting and troubleshooting
<1>Please insure firewall allowed that software access to the network,Otherwise software will not find the controller.
<2>If the software cannot search & find the controller,please check the net cable is ok or not. In general,
lan port green light often light up, red light often go out, When sending and receiving data, red light flashs. If indicator light display abnormal,please check the net cable.
<3> If the controller had not connected with router,please check the computer IP is "192.168.1.X"("X" is not "252") or not.
<4>You could modificate the default IP of the controller after connecting and searching successful,
generally as follows: menu"Tools" ------>"Communication Setup" ------>"Config".
Modbus controller manual
1. IP Address Configuration
<1>Recommend using router,that will automatic search.
Also controller could connect with lan-port directly, sometimes,it need to modify the computer IP ,so that it will search successful.
<2>Controller through the network,will automatic get its own IP within about 5 seconds, afterwhile, software could find the controller directly.
If controller through the network,will automatic get its own IP after about 10 seconds,( remark: in general,when connect with computer directly, controller will not get its own IP) controller will automatic set its own IP as"192.168.1.252". If computer"s IP is "192.168.1.X", and "X" is not "252", software could find the controller by automatic search. If computer"s IP is not "192.168.1.X", please set its IP as""192.168.1.X",and "X" is not "252", then, automatic search again.
2. Senior setting and troubleshooting
<1>Please insure firewall allowed that software access to the network,Otherwise software will not find the controller.
<2>If the software cannot search & find the controller,please check the net cable is ok or not. In general,
lan port green light often light up, red light often go out, When sending and receiving data, red light flashs. If indicator light display abnormal,please check the net cable.
<3> If the controller had not connected with router,please check the computer IP is "192.168.1.X"("X" is not "252") or not.
<4>You could modificate the default IP of the controller after connecting and searching successful,
generally as follows: menu"Tools" ------>"Communication Setup" ------>"Config".
Address:
3rd Floor, Hongdu Business Building a, Shunhe Road East, Bao′an 43th District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001, HSE
Company Introduction:
Shenzhen LongGreat Electronic Technology Co., Ltd. LongGreat is a production, research and development, sales and service as one of the LED control system supplier. Major R & D LED control card, bar screen control card, LED display control card, wireless LED system, LED industry software.
Founded in 2008, has carefully created a background of senior industry R & D team with deep industry accumulation, professional vision, technical skills quickly started the brand in the field of LED control. With system integrators and LED display manufacturers are exported to Europe, America, Japan and other developed countries, and has been set up in major cities and special sales points agents. Company not only provides professional LED control card applications research and development services, and also established a perfect after-sale service system protection, and customer win-win and common development philosophy, penetrate all aspects of company operations.
In 2011, the company introduced a new generation of any Division Series LED control card - "blue-hyun card" to cover the serial LED control card, U disk LED control card, Ethernet port LED control card, wireless LED control system product line more complete, more powerful.